Fit Check on every partFree shipping over $4930-day returns
Help: contact us
HVAC FitterTHE PART THAT FITS
PART NUMBER · YORK

York 02424115019 Condenser Fan Motor

Out of stock

Part number 02424115019 is an outdoor condenser fan motor listed under York. It is designed to drive the fan blade located in your outdoor cooling unit.

This part is out of stock right now, so it cannot be added to the cart.

One email when it is back in stock. Nothing else. Privacy policy

This motor spins the fan on top of the outdoor cabinet. The moving air pulls heat out of the unit. If the fan motor stops working, the outdoor unit will overheat and shut down.

Safety first. Turn off power at the main breaker and pull the outdoor disconnect before opening the unit or touching any wires. Test for power to ensure all electrical circuits are dead before working. High voltage in the outdoor unit can kill. A capacitor can hold a charge even when the power is turned off. Discharge it with an insulated tool before touching its terminals.

Specifications

FROM THE PART LISTINGS
  • Part number: 02424115019
  • Brand: York
  • Part type: Condenser fan motor
  • Horsepower: 1/40 HP
  • Rotation: CW (clockwise)
  • Rpm: ~3200 RPM (nominal)
  • Voltage: 460 V , 1-Phase, 60 Hz
MATCH THESE NUMBERS ON YOUR OLD CONDENSER FAN MOTOR
  • HP: must be the same
  • RPM and volts: must be the same
  • Rotation and shaft: match, or pick a reversible motor

From the maker's and parts sellers' listings for this number. Compare them with the label on your old part.

What the Condenser Fan Motor Does

Your outdoor unit releases heat collected from inside your home. The condenser fan motor sits at the top of the cabinet to spin the fan blades.

As the blades spin, outdoor air moves across the coils to keep temperatures balanced. When this motor fails, heat builds up quickly, which causes the entire system to cut off to protect itself.

Understanding the 02424115019 Specifications

A replacement motor must match the electrical and mechanical ratings printed on the factory label. The specifications for part 02424115019 are listed below:

  • Horsepower: 1/40 HP
  • Rotation: CW (clockwise)
  • RPM: ~3200 RPM (nominal)
  • Voltage: 460 V , 1-Phase, 60 Hz

Rules for Matching a Replacement Motor

When you look for a replacement for this fan motor, several key ratings must match exactly to avoid electrical issues or motor failure.

Follow these standard match requirements whenever choosing a condenser fan motor:

  • HP: must be the same.
  • RPM and volts: must be the same.
  • Rotation and shaft: match, or pick a reversible motor.

Diagnosing Problems and Replacing Safely

Before replacing a motor that will not run, verify the capacitor. A fan that hums but will not spin is often a bad capacitor, not a bad motor. A capacitor costs less, so check it first.

A new motor often needs a new capacitor rated specifically for it. Follow these safe steps if you plan to change the motor:

  1. Shut off power at the home breaker and pull the outdoor disconnect handle.
  2. Use a meter to test for power and verify that no voltage reaches the outdoor unit.
  3. Discharge the capacitor using an insulated tool before touching any wiring.
  4. Take a photo of every wire before removing the old motor so you know where each wire connects.
  5. Disconnect the motor leads and unbolt the motor from the top grille.
  6. Mount the new motor, move wires one at a time to the matching spots, and secure all hardware.

Read your old part

  1. Turn off electrical power to the outdoor unit at the disconnect and breaker.
  2. Locate the metal data plate or sticker on the side of your old motor housing.
  3. Look for the part number 02424115019 stamped on the label.
  4. Check that the specs read 1/40 HP, ~3200 RPM (nominal), and 460 V , 1-Phase, 60 Hz.
  5. Verify that the rotation shows CW (clockwise).

When to call a pro

Disconnects, whips, and line voltage wiring carry dangerous power. Hire a licensed HVAC technician for any step you are not sure you can do safely.

Questions

What happens if the condenser fan motor stops spinning?

The motor spins the fan on top of your outdoor unit to release heat. If it stops, the unit overheats and shuts down.

My fan motor only hums. Does that mean it is burned out?

Not always. A fan that hums but will not spin is often a bad capacitor, not a bad motor. Because a capacitor costs less, check it first.

Do I need a new capacitor when I install a new motor?

Yes, a new motor often needs a new capacitor rated for it. Always check the required ratings before completing the installation.

What should I do before touching the motor wires?

Turn off power at the breaker and the outdoor disconnect, then test for power. A contactor carries high voltage that can kill, and the capacitor must be discharged with an insulated tool.

Related part numbers

  • 0131P00029SCondenser Fan Motor, GoodmanSame part type
  • 1501214503Condenser Fan Motor, GreeSame part type
  • 32544123000Gas Valve Assembly, YorkSame brand
  • 338-60054-00Condenser Fan Motor, TraulsenSame part type
  • 15012466Condenser Fan Motor, CarrierSame part type
  • 1011514-42Condenser Fan Motor Guide, Ice-O-MaticSame part type
  • 12292701Condenser Fan Motor, ScotsmanSame part type

Browse: Condenser fan motors by part number

All part numbers · Part number replacements · Shop fan motors · Repair guides

Brand names and part numbers identify the part and show fit. HVAC Fitter is not affiliated with, authorized by, or endorsed by any equipment maker. If you are not sure a repair is safe for you, call a licensed HVAC technician.