Fit Check on every partFree shipping over $4930-day returns
Help: contact us
HVAC FitterTHE PART THAT FITS
PART NUMBER · SCOTSMAN

Scotsman 12292701 Condenser Fan Motor

Out of stock

Part number 12292701 is a condenser fan motor listed under Scotsman. It is designed to drive the fan assembly that cools the condenser.

This part is out of stock right now, so it cannot be added to the cart.

One email when it is back in stock. Nothing else. Privacy policy

This motor spins the fan to move air across the condenser coil. If the fan stops turning, heat builds up quickly, causing the cooling equipment to overheat and shut down.

Safety first. Turn off power at the breaker panel and pull the outdoor disconnect before touching any wiring or opening panels. Test for electrical power with a meter to verify the circuit is completely dead before servicing the motor. Discharge any connected capacitor with an insulated tool before touching its terminals, as it can hold a dangerous electrical charge even with the main power off.

Specifications

FROM THE PART LISTINGS
  • Part number: 12292701
  • Brand: Scotsman
  • Part type: Condenser fan motor
  • Height: 3.25 in
  • Length: 8.0"
  • Width: 4.4 in
MATCH THESE NUMBERS ON YOUR OLD CONDENSER FAN MOTOR
  • HP: must be the same
  • RPM and volts: must be the same
  • Rotation and shaft: match, or pick a reversible motor

From the maker's and parts sellers' listings for this number. Compare them with the label on your old part.

What the Condenser Fan Motor Does

The condenser fan motor plays a critical role in the cooling cycle. It draws or pushes air across the condenser surface to remove heat absorbed during operation. Continuous airflow keeps internal operating pressures within safe limits.

When this motor fails, heat cannot escape. The equipment will trigger internal safety controls or overheat, leading to unexpected shutdowns.

Dimensions and Physical Specs

When verifying an old motor labeled 12292701, check the physical dimensions to ensure the replacement fits inside the housing and mounting assembly.

The dimensions for this part number are:

  • Height: 3.25 in
  • Length: 8.0"
  • Width: 4.4 in

How to Match a Replacement Motor

Matching a condenser fan motor requires checking electrical ratings and mechanical setup against your old unit. Never install a motor with mismatched power ratings.

Use these standard match rules when comparing replacement motors:

  • HP: must be the same.
  • RPM and volts: must be the same.
  • Rotation and shaft: match, or pick a reversible motor.

Troubleshooting and Safe Replacement

A fan that hums but will not spin is often caused by a failing capacitor rather than a dead motor. A capacitor costs less to replace, so check its condition before removing the motor.

If the motor itself has failed, follow these safe service guidelines:

  1. Shut off power at the breaker and pull the disconnect switch. Test the lines to verify no voltage is present.
  2. Discharge the capacitor using an insulated tool before handling any wire connections.
  3. Take a photo of every wire connection on the old motor to record the exact layout.
  4. Remove the mounting hardware and carefully detach the fan blade from the shaft.
  5. Install the replacement motor, secure the mounts, and move wires one at a time to the matching spots.
  6. Remember that a new motor often needs a new capacitor rated specifically for it.

Read your old part

  1. Locate the manufacturer data tag on your existing condenser fan motor housing.
  2. Check that the part number stamped on the metal casing reads 12292701.
  3. Compare the physical size to the listed specs: height of 3.25 in, length of 8.0", and width of 4.4 in.
  4. Verify that the horsepower, voltage, and RPM ratings on the label match your replacement requirements.

When to call a pro

Hire a licensed HVAC technician for any step you are not sure you can do safely. If you encounter line voltage wiring issues or cannot safely test for power, stop work and contact a licensed professional.

Questions

Why is my condenser fan motor humming but not spinning?

A fan that hums but will not spin is often a bad capacitor, not a bad motor. A capacitor costs less, so check it first before replacing the motor.

What ratings must match when choosing a replacement condenser fan motor?

The horsepower (HP), RPM, and volts must be the same as the original part. The rotation direction and shaft dimensions must also match, or you should select a reversible motor.

Do I need to replace the capacitor when installing a new motor?

A new motor often needs a new capacitor rated specifically for it. Always check the rating requirements listed on the new motor.

What safety precautions are required before replacing this motor?

Turn off power at the breaker and the outdoor disconnect, then test for power before touching anything. A capacitor can hold a charge even with power disconnected, so it must be discharged with an insulated tool.

Related part numbers

  • 15012466Condenser Fan Motor, CarrierSame part type
  • 9161124-02Condenser Fan Motor, Ice-O-MaticSame part type
  • 1501214503Condenser Fan Motor, GreeSame part type
  • 1173665Condenser Fan Motor, ArcoaireSame part type
  • 02424115019Condenser Fan Motor, YorkSame part type
  • 1172508Condenser Fan Motor, GenteqSame part type

Browse: Condenser fan motors by part number

All part numbers · Part number replacements · Shop fan motors · Repair guides

Brand names and part numbers identify the part and show fit. HVAC Fitter is not affiliated with, authorized by, or endorsed by any equipment maker. If you are not sure a repair is safe for you, call a licensed HVAC technician.