This part is out of stock right now, so it cannot be added to the cart.
If you are holding an old board marked with this number, reviewing its physical size and electrical ratings will help you verify a match. Safe installation requires careful attention to wiring connections.
Specifications
- Part number: 1000-00032-00
- Brand: Fetco
- Part type: Control board replacement kit
- Height: 2.7 in / 6.86 cm
- Length: 8.65 in / 21.97 cm
- Voltage: 120V
- Width: 7.9 in / 20.07 cm
- Part number: listed as a replacement for yours
- Ignition type: same as your furnace
- Wiring: photo every wire first
From the maker's and parts sellers' listings for this number. Compare them with the label on your old part.
What the Control Board Does
A control board acts as the central hub for the equipment. It receives inputs from switches and controls, then routes electrical current to components in the proper sequence.
When a control board fails, the unit may fail to start, shut down unexpectedly, or stop responding to commands. Inspecting the board for burnt traces or broken terminals can help confirm that a replacement is needed.
Understanding the Part Specifications
The 1000-00032-00 control board carries specific physical dimensions and electrical ratings that must match your application.
Check these measurements against your old board and the available mounting space:
- Voltage: 120V
- Length: 8.65 in / 21.97 cm
- Width: 7.9 in / 20.07 cm
- Height: 2.7 in / 6.86 cm
How to Confirm a Replacement Matches
To ensure proper fit, match the part number from your old unit directly to this number. Control boards have specific wire layouts and mounting points.
Check that the replacement board lists your exact part number. You should also ensure that the ignition type matches your system and that the electrical rating is 120V.
Safe Removal and Installation Steps
Replacing a control board involves handling several wiring connections. Keeping connections organized is critical for proper operation.
- Shut off electrical power at the circuit breaker and test with a meter to ensure no power is present.
- Take clear photos of every wire and terminal connection before removing anything.
- Label each wire to track where it connects on the board.
- Disconnect the wires from the old board and remove the mounting hardware.
- Secure the replacement board in place using the original mounting points.
- Move wires one at a time to the matching spots on the replacement board, using your photos as a guide.
- Restore electrical power and test the equipment for correct operation.
Read your old part
- Locate the label or stamped number on your existing control board.
- Check that the part number reads 1000-00032-00.
- Verify that the board operates on 120V.
- Measure the old board to confirm the dimensions of 8.65 in / 21.97 cm length, 7.9 in / 20.07 cm width, and 2.7 in / 6.86 cm height.
- Make sure the terminal locations and wiring layout match your equipment.
When to call a pro
Board swaps can involve complex line voltage wiring and testing. If you are not sure how to wire the board safely or if you suspect other electrical issues, hire a licensed HVAC technician or electrician.
Questions
What voltage does the 1000-00032-00 control board require?
This control board is rated for 120V. Always verify that your equipment's power supply matches this voltage rating.
What are the dimensions of this board?
The board measures 8.65 in / 21.97 cm in length, 7.9 in / 20.07 cm in width, and 2.7 in / 6.86 cm in height. Check your mounting space to ensure it fits.
Why is it important to photograph the wiring before removing the old board?
Control boards have many wire connections. Taking clear photos and labeling each wire before removal ensures every wire goes back to the correct spot on the replacement board.
Related part numbers
- 108035Board Assembly Reference, FetcoSame brand and type
- 24L8501Control Board, LennoxSame part type
- 1052-00033-00Solid State Relay Reference, FetcoSame brand
- 300678Temperature Control Board, ClevelandSame part type
- 00-748512Control Board, HobartSame part type
- 1053-00003-00Thermostat, FetcoSame brand
- 1067-00001-00Capacitor, FetcoSame brand
- 300731Temperature Control Board, ClevelandSame part type
Browse: Fetco part numbers · Control boards and defrost controls by part number
All part numbers · Part number replacements · Shop control boards · Repair guides
Brand names and part numbers identify the part and show fit. HVAC Fitter is not affiliated with, authorized by, or endorsed by any equipment maker. If you are not sure a repair is safe for you, call a licensed HVAC technician.